- #EXTERNAL WIFI RECEIVER FOR MY MAC ZIP FILE#
- #EXTERNAL WIFI RECEIVER FOR MY MAC FULL#
- #EXTERNAL WIFI RECEIVER FOR MY MAC PC#
- #EXTERNAL WIFI RECEIVER FOR MY MAC TV#
#EXTERNAL WIFI RECEIVER FOR MY MAC PC#
I used the Edimax EW-7811Un currently £7.95 from Īnd ethernet cable to connect the Rpi to the TVĪ PC or Mac with a card reader to enable you to setup the SD card.
#EXTERNAL WIFI RECEIVER FOR MY MAC FULL#
There were also one or two points which could be made a bit clearer, and I will take the opportunity to start from scratch in developing this project with full step by step details to make it easy for you to follow.Ī Raspberry Pi Model B (256 or 512Mb is ok) and psuĪn SD card 2Mb or larger and a usb SD card reader (if your PC does not have an SD card slot)Ī usb WiFi adapter. I Googled the topic and found a project by Glenn Lockwood to configure a Raspberry Pi as a Wireless-to-Wired Ethernet Bridge…just what I wanted Most of the work is contained in his article which is excellent, but I found one major gotcha which caught me out and took some time to solve. What I now required was basically something working in the opposite direction. (The basis of these articles has been nicely brought together by Dave Conroy in a form which is much easier to follow here. I had previously built a wireless access point using the Rpi based on the Pi-Point Article amended according to the article by Jens Segers to allow for the fact that I was using an Edimax EW-7811Un wireless adapter which requires a special modified hostapd.
#EXTERNAL WIFI RECEIVER FOR MY MAC ZIP FILE#
If you do not want to wade through the whole article (although I hope you will) you can jump to the end where a zip file is available to download with instructions to enable you to get up and running quickly However, it occurred to me that it should be possible to build a wireless to ethernet adapter using a raspberry pi. Unfortunately this is quite expensive in the region of £50-£60 pounds and I couldn’t justify the expense for the limited number of times I might use it.
#EXTERNAL WIFI RECEIVER FOR MY MAC TV#
I have an internet ready Panasonic TV which can connect via a wired ethernet cable to a suitable internet-connected router, or via a wireless connection using a Panasonic usb wifi Dongle. IF YOU ARE INTERESTED IN TRYING OUT THIS PROJECT THEN PLEASE READ THE AMENDMENT PUBLISHED ON MAR 19th 2015 HERE
But if the signal is really that weak, then a bridge with a really high-gain direction antenna could be the best option.THIS PROJECT, AND THE AMENDEMENT BELOW ARE NOW REPLACED BY A NEW UP TO DATE VERSION YOU CAN FIND HERE
But the complexity is obviously going up so this is probably not the way to go for most people. So you could then get high gain antennas, which could potentially do better than a USB adapter. But may units will have an external antenna jack. Not all units can act as a bridge, so you'd have to shop carefully. It works very similarly to how a USB adapter would work, just that the connection is by ethernet instead of USB. You'd then connect the access point to the wired ethernet jack of the Mac. Basically it would act as a "receiver" instead of a "transmistter". If you're feeling ambitious, you could find a Wi-Fi access point that can be configured as a "bridge". If attachment of an external antenna is not possible, what would be an alternative? Often just moving the dongle higher will have noticable effect (instead of "hidden" behind the monitor, desk, cables, etc.) That way you can move the antenna to find the best reception. If you can't find a USB dongle with an antenna jack. Better to get a USB dongle.Ī USB stick that has an external antenna port? While it would be technically possible to add an external antenna, it's gonna require some skill to pull it off.
Is there a way to attach an external antenna for its internal AirPort Extreme card so that it will pull in more weaker WiFi signal? A friend has a G4-based Mac Mini (PowerMac10,2).
0 kommentar(er)
